EXCELSIOR

EXCELSIOR. BRICK BLOCKS FOR FLOORS FOR RIBS TO BE BUILT ON SITE.

The EXCELSIOR slab brick blocks have a width of 40 cm and allow, (with a rib width of 10 cm), to create a floor spacing of 50 cm.
EXCELSIOR blocks have an exclusive lightening function and, as there is no Harmonized European Standard for them, fall under case B of art. 11.1 of the NTC/2018 and related  Application Circular.

Consequently, they fully comply with the requirements of par. C4.1.9. of the Circular itself. In particular:

1) the blocks are shaped so that in the floor in place the transmission of the forces from one is continuously censure to the other element;

2) the ratio between the overall area of ​​the holes and the great area delimited by their perimeter is compliant;

3) their physical-mechanical characteristics comply with the requirements of the Application Circular in chapter C.4.1.9.1. and provide:

  • resistance to concentrated loads > 2.0 kN;
  • longitudinal compressive strength > 20MPa;
  • resistance to transversal loads > 7 MPa.

Request information about our products

If you need information on our brick solutions, fill out the form below and our engineers will reply as soon as possible

Address(Required)
Newsletter